- Each vehicle is assigned fuel key for fueling. This blue key is specific to the
vehicle.
- Before exiting your vehicle, get the meter reading and turn the vehicle off.
- Insert the fuel key into the key slot and turn the key to the right. Follow the
instructions on the screen.
- The digital screen above the keypad will prompt you for the vehicle’s mileage or
hours. Enter the mileage or hours without the tenth’s number. Press Enter.
- Select pump. Press Enter.
- The fuel pump will then validate your key and make sure everything is working properly.
If it finds a problem with the key it will send a message to you such as “Invalid
Meter” or “Invalid Key”. If there is a problem with the key, bring the key into
the Transportation Center and the attendant there will correct the problem.
- Remove key once approved.
- Pull the fuel nozzle from the slot and raise the lever that it rests in.
- Fuel your vehicle.
For your convenience, there are gloves located at the fuel island to avoid getting
fuel on your hands. If there is a fuel spill, notify someone in the fuel office,
and either they will assist you with the clean-up or will find someone to assist
you. Clean-up supplies are located in the cabinet at the north end of the fuel island.
If your vehicle is not equipped with a key, your vehicle is probably equipped with
wireless technology. In this case, you do not have to enter any info into the pump.
The system will automatically validate and check mileage. Just pull the fuel nozzle
from the slot, raise the lever it rests in, and fuel your vehicle.